Induction unit for mixing ventilation IG-M-LB, for horizontal floor mounting

Heating and Cooling / Facade Heating & Cooling Products

Induction unit for cooling, heating, and fresh air supply along the building facade, via a raised floor, providing a high level of thermal comfort.

For cooling, heating, and fresh air supply along the facade, via a raised floor, providing a high level of thermal comfort
Primary air volume flow rate: 4 to 36 l/s [15 to 130 m/h]
Low pressure loss (70 to 200 Pa), therefore energy-saving operation
Low sound, power level heating also possible without primary air, which saves energy when heating at night and at weekends
Heat exchanger cleanable from the top or the bottom (in compliance with requirements of VDI 6022).
The large fin spacing enables easy cleaning and obviates the need for a filter.
Suitable for new or refurbished buildings
Optional accessory: condensate tank below the heat exchanger, inclusive of drain with ½” connector

References:

Primary air volume flow rate:

4 – 36 l/s [15 – 130 m³/h]

Cooling capacity (total):

max. 1 320 W

Cold water temperature:

15 / 17 °C

Heating capacity:

max. 1 200 W

Hot water temperature:

50 / 40 °C

Heating capacity with self-convection:

350 W

Nominal unit width:

1 200 mm (available 800, 900, 1 200, 1 350, 1 600 mm)

Grille depth:

80 or 500 mm

Height:

220 mm

To find out how you could benefit from our product, talk to an expert today on 0203 912 6222 or fill out the form below